Small Volume ShearJet HL60 V2

Run sample sizes from 3 to 100 mLs
The Dyhydromatics ShearJet® HL60 V2 processor is our R & D workhorse. It is an electric hydraulic driven processor designed for volumes ranging from 3 mL to 500 mL and beyond. Pressures range from 5,000 to 30,000 psi. Each stroke is 1 mL which generates a flow rate of 68 mL/min. Our product heat exchanger provides superior cooling via a chiller. The small footprint and quiet operation saves valuable lab space and the need for hearing protection. Its robust design allows continuous operation at maximum pressure. Our uniquely designed HMI provides process parameters including; process pressure, process duration (in pulse or cycle modes), product temperature and data acquisition. The drive pump is designed to provide an optimal pressure profile when paired with our Reaction Chamber module. This combination will process products consistently and repetitively.

• Allows operator to set process duration in pulse mode. System stops automatically when completed.

• Cycle mode runs continuously until operator stops process.

• Calibrate pressure set points based on reaction chamber type.

• Data acquisition allows for the operator to capture pressure, temperature and process duration.

• Glass reservoir 100 mL with sanitary connection

• Two 10 mL syringes

• Lure lock connections

• Ceramic plunger

• Diamond Reaction Chamber® for longer life and wear resistant to abrasive applications

• Simple feed jacketed helical heat exchanger

• Barbed outlet

• Tools & spares

• Chiller for cooling product heat exchanger (option)

• Gaskets and O-rings in Teflon, Kalrez®, Buna-N®, EPDM, or EPR (option)

• Pharma-grade product contact parts (option)

• FAT/SAT (option)

• Onsite installation and operator training (option)

• Stainless steel reservoir 100 mL with/without recirculation

• Thermocouple

• Two 10 mL syringes

• Lure lock connections

• Ceramic plunger

• Inline pressure transducer

• Diamond Reaction Chamber® for longer life and wear resistant to abrasive applications

• Simple feed jacketed helical heat exchanger

• Barbed outlet

• Tools & spares

• Chiller for cooling product heat exchanger (option)

• Gaskets and O-rings in Teflon, Kalrez®, Buna-N®, EPDM, or EPR (option)

• Pharma-grade product contact parts (option)

• FAT/SAT

• IQ/OQ (option)

• Onsite installation and operator training

Performance:    

• Our Diamond Reaction Chamber® with our specially designed micro channels achieve consistent uniform repeatable results.

• Product yield up to 99 percent

• Greater wear resistance

Easy-to-clean:     

• Systems low dead volume allows cleaning in a matter of  minutes.

• Multiple samples may be processed in a short time span.

Economy:    

• Save on raw material costs due to low dead volume

• Process samples in minutes not hours

• Low maintenance cost due to superior system design

• Minimal seals and connection